nginx: Linux packages

Supported distributions and versions
Installation instructions
     RHEL and derivatives
     Debian
     Ubuntu
     SLES
     Alpine
     Amazon Linux
Source Packages
Dynamic Modules
Signatures

Supported distributions and versions

nginx packages are available for the following Linux distributions and versions:

RHEL and derivatives

Version Supported Platforms
8.x x86_64, aarch64/arm64
9.x x86_64, aarch64/arm64

Debian

Version Supported Platforms
11.x “bullseye” x86_64, aarch64/arm64
12.x “bookworm” x86_64, aarch64/arm64

Ubuntu

Version Supported Platforms
20.04 “focal” x86_64, aarch64/arm64
22.04 “jammy” x86_64, aarch64/arm64
24.04 “noble” x86_64, aarch64/arm64
24.10 “oracular” x86_64, aarch64/arm64

SLES

Version Supported Platforms
12 SP5+ x86_64
15 SP2+ x86_64

Alpine

Version Supported platforms
3.17 x86_64, aarch64/arm64
3.18 x86_64, aarch64/arm64
3.19 x86_64, aarch64/arm64
3.20 x86_64, aarch64/arm64

Amazon Linux

Version Supported platforms
2 (LTS) x86_64, aarch64/arm64
2023 x86_64, aarch64/arm64

Packages for SLES 12 are built without HTTP/3 support because OpenSSL used by those doesn't support TLSv1.3.

Installation instructions

Before you install nginx for the first time on a new machine, you need to set up the nginx packages repository. Afterward, you can install and update nginx from the repository.

RHEL and derivatives

This section applies to Red Hat Enterprise Linux and its derivatives such as CentOS, Oracle Linux, Rocky Linux, AlmaLinux.

Install the prerequisites:

sudo yum install yum-utils

To set up the yum repository, create the file named /etc/yum.repos.d/nginx.repo with the following contents:

[nginx-stable]
name=nginx stable repo
baseurl=http://nginx.org/packages/centos/$releasever/$basearch/
gpgcheck=1
enabled=1
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true

[nginx-mainline]
name=nginx mainline repo
baseurl=http://nginx.org/packages/mainline/centos/$releasever/$basearch/
gpgcheck=1
enabled=0
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true

By default, the repository for stable nginx packages is used. If you would like to use mainline nginx packages, run the following command:

sudo yum-config-manager --enable nginx-mainline

To install nginx, run the following command:

sudo yum install nginx

When prompted to accept the GPG key, verify that the fingerprint matches 573B FD6B 3D8F BC64 1079 A6AB ABF5 BD82 7BD9 BF62, and if so, accept it.

Debian

Install the prerequisites:

sudo apt install curl gnupg2 ca-certificates lsb-release debian-archive-keyring

Import an official nginx signing key so apt could verify the packages authenticity. Fetch the key:

curl https://nginx.org/keys/nginx_signing.key | gpg --dearmor \
    | sudo tee /usr/share/keyrings/nginx-archive-keyring.gpg >/dev/null

Verify that the downloaded file contains the proper key:

gpg --dry-run --quiet --no-keyring --import --import-options import-show /usr/share/keyrings/nginx-archive-keyring.gpg

The output should contain the full fingerprint 573BFD6B3D8FBC641079A6ABABF5BD827BD9BF62 as follows:

pub   rsa2048 2011-08-19 [SC] [expires: 2027-05-24]
      573BFD6B3D8FBC641079A6ABABF5BD827BD9BF62
uid                      nginx signing key <signing-key@nginx.com>

Note that the output can contain other keys used to sign the packages.

To set up the apt repository for stable nginx packages, run the following command:

echo "deb [signed-by=/usr/share/keyrings/nginx-archive-keyring.gpg] \
http://nginx.org/packages/debian `lsb_release -cs` nginx" \
    | sudo tee /etc/apt/sources.list.d/nginx.list

If you would like to use mainline nginx packages, run the following command instead:

echo "deb [signed-by=/usr/share/keyrings/nginx-archive-keyring.gpg] \
http://nginx.org/packages/mainline/debian `lsb_release -cs` nginx" \
    | sudo tee /etc/apt/sources.list.d/nginx.list

Set up repository pinning to prefer our packages over distribution-provided ones:

echo -e "Package: *\nPin: origin nginx.org\nPin: release o=nginx\nPin-Priority: 900\n" \
    | sudo tee /etc/apt/preferences.d/99nginx

To install nginx, run the following commands:

sudo apt update
sudo apt install nginx

Ubuntu

Install the prerequisites:

sudo apt install curl gnupg2 ca-certificates lsb-release ubuntu-keyring

Import an official nginx signing key so apt could verify the packages authenticity. Fetch the key:

curl https://nginx.org/keys/nginx_signing.key | gpg --dearmor \
    | sudo tee /usr/share/keyrings/nginx-archive-keyring.gpg >/dev/null

Verify that the downloaded file contains the proper key:

gpg --dry-run --quiet --no-keyring --import --import-options import-show /usr/share/keyrings/nginx-archive-keyring.gpg

The output should contain the full fingerprint 573BFD6B3D8FBC641079A6ABABF5BD827BD9BF62 as follows:

pub   rsa2048 2011-08-19 [SC] [expires: 2027-05-24]
      573BFD6B3D8FBC641079A6ABABF5BD827BD9BF62
uid                      nginx signing key <signing-key@nginx.com>

Note that the output can contain other keys used to sign the packages.

To set up the apt repository for stable nginx packages, run the following command:

echo "deb [signed-by=/usr/share/keyrings/nginx-archive-keyring.gpg] \
http://nginx.org/packages/ubuntu `lsb_release -cs` nginx" \
    | sudo tee /etc/apt/sources.list.d/nginx.list

If you would like to use mainline nginx packages, run the following command instead:

echo "deb [signed-by=/usr/share/keyrings/nginx-archive-keyring.gpg] \
http://nginx.org/packages/mainline/ubuntu `lsb_release -cs` nginx" \
    | sudo tee /etc/apt/sources.list.d/nginx.list

Set up repository pinning to prefer our packages over distribution-provided ones:

echo -e "Package: *\nPin: origin nginx.org\nPin: release o=nginx\nPin-Priority: 900\n" \
    | sudo tee /etc/apt/preferences.d/99nginx

To install nginx, run the following commands:

sudo apt update
sudo apt install nginx

SLES

Install the prerequisites:

sudo zypper install curl ca-certificates gpg2

To set up the zypper repository for stable nginx packages, run the following command:

sudo zypper addrepo --gpgcheck --type yum --refresh --check \
    'http://nginx.org/packages/sles/$releasever_major' nginx-stable

If you would like to use mainline nginx packages, run the following command instead:

sudo zypper addrepo --gpgcheck --type yum --refresh --check \
    'http://nginx.org/packages/mainline/sles/$releasever_major' nginx-mainline

Next, import an official nginx signing key so zypper/rpm could verify the packages authenticity. Fetch the key:

curl -o /tmp/nginx_signing.key https://nginx.org/keys/nginx_signing.key

Verify that the downloaded file contains the proper key:

gpg --with-fingerprint /tmp/nginx_signing.key

The output should contain the full fingerprint 573B FD6B 3D8F BC64 1079 A6AB ABF5 BD82 7BD9 BF62 as follows:

pub  2048R/7BD9BF62 2011-08-19 [expires: 2027-05-24]
      Key fingerprint = 573B FD6B 3D8F BC64 1079  A6AB ABF5 BD82 7BD9 BF62
uid nginx signing key <signing-key@nginx.com>

Finally, import the key to the rpm database:

sudo rpmkeys --import /tmp/nginx_signing.key

To install nginx, run the following command:

sudo zypper install nginx

Alpine

Install the prerequisites:

sudo apk add openssl curl ca-certificates

To set up the apk repository for stable nginx packages, run the following command:

printf "%s%s%s%s\n" \
    "@nginx " \
    "http://nginx.org/packages/alpine/v" \
    `egrep -o '^[0-9]+\.[0-9]+' /etc/alpine-release` \
    "/main" \
    | sudo tee -a /etc/apk/repositories

If you would like to use mainline nginx packages, run the following command instead:

printf "%s%s%s%s\n" \
    "@nginx " \
    "http://nginx.org/packages/mainline/alpine/v" \
    `egrep -o '^[0-9]+\.[0-9]+' /etc/alpine-release` \
    "/main" \
    | sudo tee -a /etc/apk/repositories

Next, import an official nginx signing key so apk could verify the packages authenticity. Fetch the key:

curl -o /tmp/nginx_signing.rsa.pub https://nginx.org/keys/nginx_signing.rsa.pub

Verify that downloaded file contains the proper key:

openssl rsa -pubin -in /tmp/nginx_signing.rsa.pub -text -noout

The output should contain the following modulus:

Public-Key: (2048 bit)
Modulus:
    00:fe:14:f6:0a:1a:b8:86:19:fe:cd:ab:02:9f:58:
    2f:37:70:15:74:d6:06:9b:81:55:90:99:96:cc:70:
    5c:de:5b:e8:4c:b2:0c:47:5b:a8:a2:98:3d:11:b1:
    f6:7d:a0:46:df:24:23:c6:d0:24:52:67:ba:69:ab:
    9a:4a:6a:66:2c:db:e1:09:f1:0d:b2:b0:e1:47:1f:
    0a:46:ac:0d:82:f3:3c:8d:02:ce:08:43:19:d9:64:
    86:c4:4e:07:12:c0:5b:43:ba:7d:17:8a:a3:f0:3d:
    98:32:b9:75:66:f4:f0:1b:2d:94:5b:7c:1c:e6:f3:
    04:7f:dd:25:b2:82:a6:41:04:b7:50:93:94:c4:7c:
    34:7e:12:7c:bf:33:54:55:47:8c:42:94:40:8e:34:
    5f:54:04:1d:9e:8c:57:48:d4:b0:f8:e4:03:db:3f:
    68:6c:37:fa:62:14:1c:94:d6:de:f2:2b:68:29:17:
    24:6d:f7:b5:b3:18:79:fd:31:5e:7f:4c:be:c0:99:
    13:cc:e2:97:2b:dc:96:9c:9a:d0:a7:c5:77:82:67:
    c9:cb:a9:e7:68:4a:e1:c5:ba:1c:32:0e:79:40:6e:
    ef:08:d7:a3:b9:5d:1a:df:ce:1a:c7:44:91:4c:d4:
    99:c8:88:69:b3:66:2e:b3:06:f1:f4:22:d7:f2:5f:
    ab:6d
Exponent: 65537 (0x10001)

Finally, move the key to apk trusted keys storage:

sudo mv /tmp/nginx_signing.rsa.pub /etc/apk/keys/

To install nginx, run the following command:

sudo apk add nginx@nginx

The @nginx tag should also be specified when installing packages with dynamic modules:

sudo apk add nginx-module-image-filter@nginx nginx-module-njs@nginx

Amazon Linux

Install the prerequisites:

sudo yum install yum-utils

To set up the yum repository for Amazon Linux 2, create the file named /etc/yum.repos.d/nginx.repo with the following contents:

[nginx-stable]
name=nginx stable repo
baseurl=http://nginx.org/packages/amzn2/$releasever/$basearch/
gpgcheck=1
enabled=1
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true
priority=9

[nginx-mainline]
name=nginx mainline repo
baseurl=http://nginx.org/packages/mainline/amzn2/$releasever/$basearch/
gpgcheck=1
enabled=0
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true
priority=9

To set up the yum repository for Amazon Linux 2023, create the file named /etc/yum.repos.d/nginx.repo with the following contents:

[nginx-stable]
name=nginx stable repo
baseurl=http://nginx.org/packages/amzn/2023/$basearch/
gpgcheck=1
enabled=1
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true
priority=9

[nginx-mainline]
name=nginx mainline repo
baseurl=http://nginx.org/packages/mainline/amzn/2023/$basearch/
gpgcheck=1
enabled=0
gpgkey=https://nginx.org/keys/nginx_signing.key
module_hotfixes=true
priority=9

By default, the repository for stable nginx packages is used. If you would like to use mainline nginx packages, run the following command:

sudo yum-config-manager --enable nginx-mainline

To install nginx, run the following command:

sudo yum install nginx

When prompted to accept the GPG key, verify that the fingerprint matches 573B FD6B 3D8F BC64 1079 A6AB ABF5 BD82 7BD9 BF62, and if so, accept it.

Source Packages

Packaging sources can be found in the packaging sources repository.

The default branch holds packaging sources for the current mainline version, while stable-* branches contain latest sources for stable releases. To build binary packages, run make in debian/ directory on Debian/Ubuntu, or in rpm/SPECS/ on RHEL and derivatives, SLES, and Amazon Linux, or in alpine/ on Alpine.

Packaging sources are distributed under the same 2-clause BSD-like license used by nginx.

Dynamic Modules

Main nginx package is built with all modules that do not require additional libraries to avoid extra dependencies. Since version 1.9.11, nginx supports dynamic modules and the following modules are built as dynamic and shipped as separate packages:

nginx-module-geoip
nginx-module-image-filter
nginx-module-njs
nginx-module-perl
nginx-module-xslt

Additionally, since version 1.25.3, the following module is shipped as a separate package:

nginx-module-otel

Signatures

Since our PGP keys and packages are located on the same server, they are equally trusted. It is highly advised to additionally verify the authenticity of the downloaded PGP key. PGP has the “Web of Trust” concept, when a key is signed by someone else’s key, that in turn is signed by another key and so on. It often makes possible to build a chain from an arbitrary key to someone’s key who you know and trust personally, thus verify the authenticity of the first key in a chain. This concept is described in details in GPG Mini Howto. Our keys have enough signatures, and their authenticity is relatively easy to check.